The Buttons On The Remote Control - RCA B27TF680 User Manual

Using the Remote Control

The Buttons on the Remote Control

Your backlit remote has a light button that glows in the dark. Press this button to light the
channel up and channel down (CH +/–), volume up and down (VOL </>), MUTE, SOUND,
SPEED-ZOOM, RETURN and the backlight buttons. If you don't press any buttons for several
seconds, the light turns off to conserve battery power.
L.E.D.
ON•OFF
VCR
DVD REPEAT VCR2
MUTE
+
CH
CH
OK
TV MENU
1 2 3
4 5 6
7 8 9
INPUT
0
REVERSE PLAY FORWARD
RECORD STOP
SKIP-
DVD SETUP TITLE SLOW
INDEX-
24
Component Buttons
DVD button
SAT•CABLE button
or cable box. Used with ON•OFF button to turn on some brands of receivers or
TV
cable boxes.
SAT•CABLE
TV button
VCR button
SOUND
VCR2 button
TV and VCR Function Buttons
RETURN Press TV to put the remote in the TV mode. Press VCR to put the remote in VCR
mode.
INFO
0-9 (Number buttons) Enter channel numbers directly through the remote.
To enter a 2-digit channel, press the two digits. To enter a 3-digit channel, press
and hold the first digit until two dashes appear on the screen (to the right of the
first number), then add the next two digits. Example: to tune to channel 123,
CLEAR
press and hold 1 until 1– – appears, press 2, then press 3. Also use the number
buttons to enter your password for Parental Controls.
Arrow buttons (up, down, right, and left) Press the arrow buttons to move
through the on-screen menus. You highlight a menu item by pressing the arrow
buttons. You select a highlighted item by pressing the OK button.
VIEW
CH (+ and –) buttons Scan up or down through stored channels. Press once
to change the channel up or down; press and hold to continue changing
channels.
PAUSE
CLEAR Resets the time counter on the VCR.
DISC
FORWARD (fast forward) Fast forwards the tape when the TV/VCR is
MENU
stopped. Also searches the picture in forward motion during playback. The
INDEX+ remote must be in VCR mode.
INDEX (+ and –) buttons Searches for recorded index marks. The remote
must be in VCR mode.
INFO Displays current status. Displays time counter and time-remaining display
when a tape is inserted. Press again to remove information on-screen.
Use this button to set the remote to operate the DVD player.
Use this button to set the remote to operate the receiver
Use this button to set the remote to operate the TV.
Use this button to set the remote to operate the VCR.
Use this button to set the remote to operate a second VCR.
Chapter 2