The Front Of Your Tv/Dvd; Front Inputs; Front Panel Buttons; Put Batteries In The Remote - RCA L32WD26D User Manual

Scenium series hdtv/dvd monitor
Hide thumbs Also See for L32WD26D:
Table of Contents

Advertisement

Connections & Setup

The Front of Your TV/DVD

Front Inputs

The TV/DVD has front inputs for convenience: one set of audio/video inputs, an S-Video and a headphone jack. Locate the jacks either on the front of
the TV/DVD or on one of the sides. You can access the component you connected to the front of the TV/DVD by pressing the INPUT button on your
remote until FRNT appears on the screen. The jacks are ideal for using a video game console or a camcorder.
Note: When connecting a device that uses a monaural cable, such as some camcorders, use the Left (mono) input jack to get sound from both speakers.
PHONES Allows you to connect headphones to listen to the sound coming from the TV/DVD. To adjust volume control of the headphones, press the
VOL > or VOL < button (the volume display appears). Press the arrow up or down button (the headphone volume display appears), then press the right
or left arrow button to adjust the headphone volume.
L/MONO and R AUDIO IN Receives audio from another component such as a VCR, camcorder or video game console.
VIDEO IN Receives video from another component such as a VCR, camcorder or video game console.
S-VIDEO IN Allows you to connect an S-Video cable from another component. Make sure you also connect audio cables from the component to the
TV/DVD.

Front Panel Buttons

If you cannot locate your remote, you can use the front panel buttons of your TV/DVD to operate many of the TV/DVD's features.
OPEN/CLOSE Press to open and close disc tray.
STOP Stops disc play.
PLAY Begins disc play.
MENU/OK Brings up the TV Main menu. When in the menu system, selects highlighted items.
CH v Scans down through the current channel list. In the TV menu system, acts like down arrow button on the remote control and adjusts menu
controls.
CH
Scans up through the channel list. In the TV menu system, acts like up arrow button on the remote control and adjusts menu controls.
VOL < Decreases the volume. In the TV menu system, acts like left arrow button on the remote control and adjusts menu controls.
VOL > Increases the volume. In the TV menu system, acts like right arrow button on the remote control and adjusts menu controls.
POWER Turns the TV/DVD on and off.

Put batteries in the remote

• Remove the battery compartment cover from the back of the remote by pushing down on and sliding off the cover.
• Insert 2 "AA" fresh batteries. Make sure the polarities (+ and -) are aligned correctly.
• Replace the cover.

Turn on the TV/DVD

Press TV on the remote, or press POWER on the TV/DVD's front panel.
Note: Pressing the TV button not only turns on the TV, but puts the remote into TV mode. "TV mode" means that the buttons on the remote control operate the TV's functions.
Tip
To access the setup menus manually,
press MENU and choose SETUP.
12

Complete the Initial Setup

The menu system in your TV allows the TV's features to work properly. The first time you turn on your TV/DVD,
the setup screens appear.
Chapter 1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D52w136d - 52" hdtv monitor

Table of Contents