Advertisement
TECHNICAL SPECIFICATIONS
Maximum DC
Input Power
1200W
Maximum DC Input Current
22A
Maximum DC Input Voltage
100V
Maximum Power Point
55VDC - 90VDC
Tracking Range
Automatic Turn ON
70VDC
(MPPT - ON)
Automatic Turn
ON
54VDC
(MPPT - OFF)
Starting Operation
10W
Number of Modules
4x 12V modules or
Per String
2 X 24V modules
Reverse Polarity
Short Circuit Diode Across
Protection
DC Input Terminals
Output Data
Output Power
1000W cont. (1100W Max)
Output Voltage Range
205 -265 Vac
Output Frequency
50Hz tolerance +/- 1Hz
Peak Efficiency
93 %
Night Time Power
NIL Automatically
Consumption
Disconnects from AC Grid
Input/Output Isolation
3500V via Toroidal
Transformer
o
o
Operating Temperature
- 10 C to 50 C
Anti islanding Protection
Over/under voltage
Over/under frequency
Active phase shift
General Data
Status Indicators
Output power in 25% Increments
Grid Monitoring - Stability check
Solar Input ON
Grid Fault
Overload
Wall Mount Enclosure
Powder Coated Aluminum
Dimensions
330mm x 296mm x 150mm
H
W
Weight
11 kg
Connections
Hardwire Junction Box
Warranty
3 years
Standards
C-Tick
A 3100, AS4777
S
E 55014
N
Certificate of Suitability
14
2500W
22A
200V
110VDC - 180VDC
140VDC
108VDC
10W
8 x 12V modules
4 X 24V modules
Short Circuit Diode Across
DC Input Terminals
2100W cont. (2200W Max)
205- 265 Vac
50Hz tolerance +/- 1Hz
93 %
NIL Automatically
Disconnects from AC Grid
3500V via Toroidal
Transformer
o
o
- 10 C to 50 C
Over/under voltage
Over/under frequency
Active phase shift
Output power in 25% Increments
Grid Monitoring - Stability check
Solar Input ON
Grid Fault
Overload
Powder Coated Aluminum
370mm x 386mm x 180mm
D
H
W
D
22 kg
Hardwire Junction Box
3 years
C-Tick
A 3100, AS4777
S
E 55014
N
Certificate of Suitability
DC WIRING
The Inverter is designed to operate directly from a photovoltaic supply.
!
If other sources of DC input are required e.g wind turbines, micro
hydro turbines etc, a battery bank will be required with the Maximum
Power Point Tracking (MPPT) disabled (see pg 7.)
!
The DC input voltage is stated on the PV Edge compliance label and
the technical specifications sheet within this manual. Check that the
input voltage is within the required limits and does not exceed the
maximum limit (see pg 14).
!
Recommended minimum cable size for the DC Input is 4sqmm with
an insulation rating of 0.6/1KV.
!
Observe Polarity.
!
The Inverter is fitted with DC circuit breakers for the positive and
negative DC Input connections.
!
Ensure the DC breakers are switched OFF when working on DC
wiring.
SAFETY
Inverter Isolation and Safety
*
All Latronics Inverters have an isolation rating of 3500V between AC
and DC via the Toroidal Transformer, which ensures extremely safe
and risk free operation.
*
All the switching electronics and control circuitry are on the DC input.
*
The Circuit Breaker assembly ensures that when the Inverter is
switched OFF, it is isolated from the DC Input and AC Mains.
Please refer to relevant Australian Standards for safety procedures
3
Advertisement
