Keyword Index - Viessmann Vitoflame 100 Service Instructions Manual

Keyword index

0
0 point of blast tube connection, check-
ing......................................................11
A
Additives for fuel oil............................52
Air damper position..............................7
Air volume adjustment.......................10
B
Biofuels..............................................52
Blast tube connection setting screw...10
Burner control unit
■ Function and fault indications of the
signal indicator (LED).....................21
■ Program sequence during commis-
sioning............................................20
■ Sequence diagram for burner fault. 22
Burner fault, sequence diagram.........22
Burner fault sequence diagram..........22
C
Checking and adjusting the ignition elec-
trodes.................................................16
Checking the settings of the air damper
servomotor...........................................7
Checking the vacuum..........................7
Cleaning the burner...........................14
Combustion improvers.......................52
Commissioning/service report............41
Component overview.........................29
Connection and wiring diagram.........31
D
Diagnosis
■ Faults with flashing code display....24
■ Faults without flashing code display27
F
Flame monitor, safety check..............13
Flame monitor cleaning and testing...13
Flashing code ....................................24
Fuel oil
■ Additives.........................................52
■ Quality............................................52
I
Ignition air setting.................................7
N
Nozzle replacement...........................15
O
Oil pressure adjustment.......................7
Oil pump filter, cleaning or if required
replacing............................................18
Operating and service documents.....19
P
Parts list.............................................34
S
Standard values for burner settings...48
System start-up....................................6
Keyword index
53