Introduction; Purpose Of This Documentation; History - Siemens SITRANS TH400 Operating Instructions Manual

Introduction

1.1

Purpose of this documentation

These instructions contain all information that you will require to commission and use the
device. Read these instructions carefully prior to installation and commissioning. In order to
use the device correctly, first make yourself acquainted with its principle of operation.
The instructions are aimed both at persons mechanically installing the device, connecting it
electronically, configuring the parameters and commissioning it as well as service and
maintenance engineers.
1.2

History

This history establishes the correlation between the current documentation and the valid
firmware of the device.
The documentation of this edition is applicable for the following firmware variants:
Edition
PROFIBUS PA version:
01
02/2007
02
06/2010
FOUNDATION fieldbus version:
01
02/2007
02
06/2010
The most important changes in the documentation when compared with the respective
previous edition are given in the following table.
Edition
01
02/2007
02
06/2010
SITRANS TH400
Operating Instructions, 06/2010, A5E01018688-02
Firmware identification type
plate
FW: V2.03
FW: V2.03
Remarks
First edition
Revised safety information, modifications in chapter "Connection"
System integration
PDM V6.0
DD rev. 1.00
Standard fieldbus
compatible control
systems
1
Installation path for PDM
SITRANS TH400
Not relevant.
5