Operation - Siemens SITRANS TH400 Operating Instructions Manual

Operation

Operator control options
You can operate the transmitter over PROFIBUS PA or FOUNDATION Fieldbus.
Operation via PROFIBUS PA
In order to configure or operate the transmitter, you require a PC/PG with SIMATIC PDM,
V6.0 or later. The following documentation contains all information relevant to operation via
PROFIBUS PA:
● Manual
● Configuration manual
Operation via FOUNDATION Fieldbus
You require the following equipment to operate or configure the device:
● A PC/PG with appropriate engineering software, e.g. "Emerson AMS"
● Alternative: Handheld 375
All information you require to use the equipment can be found in the respective
documentation.
The following documentation contains all information required for operation with
FOUNDATION Fieldbus:
● Configuration manual
SITRANS TH400
Operating Instructions, 06/2010, A5E01018688-02
"SIMATIC The Process Device Manager" 05/2008
"Temperature measuring instruments SITRANS TH400 PROFIBUS® PA",
Configuration manual 02/2007,
Order No. A5E01039143
"Temperature measuring instruments SITRANS TH400 FOUNDATION™ Fieldbus",
Configuration manual 02/2007,
Order No. A5E01039144.
6
27