Device Delivery Condition - Siemens SITRANS TH400 Operating Instructions Manual

8.3

Device delivery condition

The device parameters of the SITRANS TH400 - PA/FF are set to default values. You will
find the default settings in the relevant "Configuration Manuals".
When the SITRANS TH400 is delivered, the following parameters are set differently from the
default assignment:
SITRANS TH400-PA (7NG3214)
Break monitoring, channel 1
Short circuit monitoring, channel 1
SITRANS TH400-FF (7NG3215)
Break monitoring, channel 1
Short circuit monitoring, channel 1
Excerpt of important default values for SITRANS TH400-PA and SITRANS TH400-FF
Sensor
Connection type
Unit
Failure behavior
Filter time
Only for SITRANS TH400-PA devices
Only for SITRANS TH400-FF devices
SITRANS TH400
Operating Instructions, 06/2010, A5E01018688-02
Parameter
PA address
PROFIBUS identification
number
Node address
Pt100 (IEC)
Three-wire input
°C
Last valid value
0 s
126
Manufacturer-specific
22
Functions
8.3 Device delivery condition
Set value
ON
OFF
ON
OFF
33