Configuring The Mldp User Interface For Feature Filtering - Recursive Fec - Cisco CRS Series Configuration Manual

Multipoint Label Distribution Protocol Route Policy Map
FEC Root
Opaque decoded
Features
Upstream neighbor(s) :
Downstream

Configuring the mLDP User Interface for Feature Filtering - Recursive FEC

SUMMARY STEPS
1. configure
2. mpls ldp mldp
3. address-family ipv4
4. recursive-fec route-policy rfec
5. end
6. commit
7. Use the show command to verify the configuration: show running-config mpls ldp mldp
DETAILED STEPS
Command or Action
Step 1 configure
Example:
RP/0/RP0/CPU0:router# configure
Step 2
mpls ldp mldp
Example:
RP/0/RP0/CPU0:router(config)#mpls ldp mldp
Step 3
address-family ipv4
Example:
RP/0/RP0/CPU0:router(config-ldp-mldp)#address-family
ipv4
Step 4 recursive-fec route-policy rfec
Example:
RP/0/RP0/CPU0:router(config-ldp-mldp-af)#
recursive-fec route-policy rfec
Step 5 end
Cisco IOS XR Multicast Configuration Guide for the Cisco CRS Router, Release 5.2.x
58
: 10.0.0.1
: [ipv4 0.0.0.0 224.1.1.1]
: MoFRR MBB
10.0.0.1:0 [Active]
Next Hop : 10.0.3.3
Interface : GigabitEthernet0/2/1/1
Local Label (D) : 16028
client(s):
LDP 10.0.0.2:0 Uptime: 03:25:15
Next Hop : 10.0.4.2
Interface : GigabitEthernet0/2/1/2
Remote label (D) : 16029
Implementing Multicast Routing on Cisco IOS XR Software
Uptime: 03:25:15
Purpose
Enters global configuration mode.
Enters the LDP configuration mode.
Enters the LDP address family configuration mode.
Configures the specified feature to the MLDP policy
to be allowed to be selected for filtering.