Configuring Mvpn Mldp Bidir - Cisco CRS Series Configuration Manual

Implementing Multicast Routing on Cisco IOS XR Software
Command or Action
Step 49
rp-address ip-address
Example:
RP/0/RP0/CPU0:router(config-pim-default-ipv4)#
rp-address 10.10.10.10
Step 50 vrf name
Example:
RP/0/RP0/CPU0:router(config-bgp)# vrf vrf1
Step 51
address-family {ipv4 | ipv6}
Example:
RP/0/RP0/CPU0:router(config-pim-default-ipv4)#
address-family ipv4
Step 52 rp-address ip-address [group-access-list] [bidir]
Example:
RP/0/RP0/CPU0:router(config-pim-default-ipv4)#
rp-address 101.101.101.101 group_1 bidir
Step 53 commit

Configuring MVPN MLDP BIDIR

Perform these steps to configure MVPN MLDP BIDIR.
Cisco IOS XR Multicast Configuration Guide for the Cisco CRS Router, Release 5.2.x
Configuring MVPN MLDP BIDIR
Purpose
Configures the Rendezvous point and assigns an RP
to multicast groups.
The RP mechanism can be static, auto-rp,
Note
or BSR.
Configures the VRF.
Configures ipv4 address-family for mvpn and enters
the address family command mode.
Configures the Rendezvous point and assigns an RP
to multicast groups.
83