Universal Remote Control - RCA RV3693 User Manual

Tour of the Receiver

Universal Remote Control

Your RCA Universal Remote Control is capable of operating
most RCA audio and video equipment. To use the remote
control effectively, always aim it directly at your receiver.
The remote control operates on four batteries, included with
your system. Install them before attempting to operate the
remote. Be sure to match the
the symbols shown in the remote's battery compartment.
Basic Controls
MUTE Turns off the receiver's sound. Press again to restore
the sound.
POWER Turns the AM/FM receiver off with one press. If you
have multiple components turned on and not the AM/FM
receiver, pressing POWER once turns off the last component
turned on. Pressing POWER again turns off all components.
VOL UP and DOWN Increases or decreases the volume.
Receiver Controls
AM•FM Activates the tuner and toggles between the AM
band and the FM band.
CTR MODE Changes the Center mode when using Dolby
Pro-Logic Surround or Dolby 3 Stereo surround modes. Press
once and the current mode appears. Press again to change
the mode.
DELAY/CH CTRL Selects the amount of Surround Sound delay
between the main and rear speakers. Choose from 15, 20 or
30 milliseconds. Press once and the current setting appears.
Press again to change the setting.
SURROUND Lets you select a Surround Mode: Dolby
Pro Logic Surround, Dolby 3-Stereo, Hall or By-Pass. Press once
and the current mode appears. Press again to change the
mode.
-
+
and ends of each battery to
•
VCR LD CD
2
•
AM FM TAPE AUX
REW PLAY FF
REC STOP PAUSE
•
SKIP
GUIDE RDM
•
MUTE PREV CH
1 2 3
4 5 6
7 8 9
•
INPUT SEEK ANTENNA
0
•
DISPLAY CLEAR RESET REP DELAY
CH CTRL
MENU TV MENU
MOVE
PROGRAM
+
PIP SWAP PIP
–
CTR MODE
•
BY-PASS SWAP LEVEL
AUDIO
DISC
18