RCA RV3693 User Manual page 6

First Things First
Step 1: Unpack the Receiver
Unpack the receiver and the accessories. The accessories
packed with the receiver include the RCA Universal Remote
(CRK67A1-224875), four batteries, an AM loop antenna, an
FM wire antenna, and Important Safeguards.
Step 2: Connect the Receiver
Before you plug in and turn on your audio/video receiver,
connect the receiver to the components in your system and
connect the speakers.
The next section shows how to connect the receiver to a TV
only. If you are going to connect the receiver to a TV and
VCR, laserdisc player or other component, see Appendix A:
Connecting the Receiver.
For information on connecting your speakers, see Appendix
A: Connecting the Receiver. For three suggestions on placing
your speakers for the best sound, see Appendix B: Speaker
Placement.
TV Only
Do not plug your TV or VCR into the "switched"
outlet on the back of the receiver.
You will need:
(1) paired (red/white) stereo cable
(1) single (yellow) video cable
(1) coaxial cable.
Connect the cables as shown on the right.
CABLE
IN
BOX
OUT
TV
L/MONO RIGHT VIDEO
INPUT 1
L/MONO RIGHT VIDEO
INPUT 2
L/MONO RIGHT VIDEO
INPUT 3
AUDIO
RECEIVER
IN
VCR 1
VCR 1
IN
L
R
L
R
TV
OR ANTENNA
S-VIDEO OUTPUT VIDEO L/MONO
BRIDGED
FROM
INPUT 1
VIDEO L/MONO
FIXED
OUTPUT
VIDEO L/MONO
S-VIDEO
TV TUNER
OUTPUT
ANT A ANT B
SIGNAL
SOURCE
VIDEO
OUT VCR 2/ MONITOR
DSS
LD OUT
VCR 2/ DSS
OUT
LD
AUDIO
1
AUDIO
2
AUDIO IN OUT SUB WOOFER
CD SOURCE TAPE/MD OUT (MONO)
RIGHT
RIGHT
RIGHT
4