Sony KP-46WT520 Operating Instructions Manual page 40

Setting Up the Channel List
After you finish connecting the TV, you need to run the Auto
Program feature, which automatically creates a list of available
channels_ The Auto Program screens appear when you turn on your
TV for the first time after hooking it up.
Torun Auto Program the first time you turn on your TV
1 Press POWER to turn on the TV.
The Initial Setup screen appears.
2 When prompted to start Auto Program, press the OH+ button to
start Auto Program.
Torun Auto Programagain at a later time
[] Use the Auto Program feature as described on page 67.
To reset the TV to factory settings
I
Press
POWER to turn on the TV.
2 Hold down RESET on the remote control.
3 Press TV POWERon the TV. (The TV will turn itself off, then back
OFt.)
4
Release
RESET.
39