Sony KP-46WT520 Operating Instructions Manual page 20

Ifyou have adigital cabJe
bo×, you cannot use this
connection because the
TO CONVERTER jack is not
compat[b] e with dig!tal
cabMeboxes.
Notes on Using This Connection
Toconnect the cable box and cable
1 Connect the cable from your cable company to the TV's
2 Use a coaxial cable to connect the TV's TO CONVERTER jack to
the cable box's input jack. (The TV's internal converter lets you
switch between unscrambled signals coming straight into the TV
and scrambled signals coming in through the cable box,
eliminating the need for an external splitter.)
3 Use a coaxial cable to connect the cable box's output jack to the
TV's AUX jack.
4 Run Auto Program, as described in "Setting Up the Channel List"
on page 39.
Coaxial cable
OUT 3 AUX
2
TO
Coaxial cable CONVERTER
"1
Cable (unscrambled channels) VHFIUNF
Use the cable box Tune the TV to the channel the cable box is set to (usually channel 3 or 4)
and then use the cable box to switch channels.
Set up the TV remote control Program the remote control. See "ProgramrrLing the Remote Control" on
to operate the cable box pages 46-47.
Activate the remote control to Press SAT/CABLE FUNCTION.
operate the cable box
Prevent the accidental When using the cable box, you need the TV 1o stay on the channe! the cable
switching of TV channels box is set 1o (usually channel 3 or 4). You can use the TV's Channel Fix
feature to lock in a specific channel For details, see "Using the Channe!
Menu" on page 67.
Switch the TV s lnt_ ut Press ANT to switc!-_ back and forth between the TV's VHF/UHF arid AUX
between the cable box and inputs.
cable
19