Sony KP-46WT520 Operating Instructions Manual page 21

Cable Box Only
Forbest
results, use
this connectionif:
[] Your cable company scrambles all chamtels,
which requires you
to use a cable box.
[] You do not have a VCR. (If you have a VCR, see pages 24 and 26.)
With this connection you can:
[] Use the TV remote control to change channels coming through
the cable box to the TV*s VHF/UHF jack, (You must first
program the remote control for your specific cable box,)
With this connection, all channels come into the TV through your cable box and only one
unscrambled signal is sent to the TV;so you cannot use the dua! picture features. If some
of your channels are scrambled, but others are not, consider using the "Cable Box and
Cable" connection on page !8 instead.
To connect
the cable box
1
Connect the CATV cable to the cable box's input jack.
2 Use a coaxial cable to connect the cable box's output jack to the
TV's VHF/UHF jack.
3 Run Auto Program, as described in "Setting Up the Channel List"
on page 39.
CAW Coaxial cable VHFIUHF
cable
IN _ OUT
Notes on Using This Connection
Use the cable box Tune the TV to the channel the cable box is set to (usually channel 3 or 4)
and then use the cable box to switch channels.
Set up the TV remote control Program the remote control See "Programming the Remote Control" on
to operate the cable box pages 46-47.
Activate _he rernote control to Press SAT/CABLE FUNCTION,
operate the cable box
Prevent the accidental When using the cable box, you need the TV to stay on the channel the cable
switching of TV channels box is set to (usually channel 3 or 4). You can use the TV's Channel Fix
feature to ]ock in a specific channel. For details, see "Using the Channe]
Menu" on page 67.