Sony KP-46WT520 Operating Instructions Manual page 31

Satellite Receiver
and VCR
Z
_ usi.g
$ VIDEO jacks?
See page 23.
Toconnecta satellite receiverand VCR
I
Connect the CATV cable to the single (input) jack of the splitter.
2 Use a coaxial cable to connect one of the splitter's two output
jacks to the TV's VHF/UHF jack.
3 Use a coaxial cable to connect the splitter's other output jack to
the satellite receiver's VHF/UHF input jack.
4 Connect the satellite antenna cable to the satellite receiver's
satellite input jack.
5 Use a coaxial cable to connect the satellite receiver's VHF/UHF
output jack to the VCR's VHF/UHF input jack.
6 Use an A/V cable to connect the satellite receiver's A/V output
jacks to the TV's A/V input jacks.
7 Use an A/V cable to connect the VCR's A/V output jacks to the
TV's A/V input jacks,
8 Run Auto Program, as described in "Setting Up the Channel List"
on page 39.
Notes on Using This Connection
Watch the satellite receiver Press TV/VIDE0 repeatedly to select the satellite receiver input (VIDEO 3 h_
the
illustration)_
Watch the VCR Press TV/VIDE0
repeatedly to
select VCR
input
(VIDEO ! in the illustration).
Set up the TV remote contro! If you have a non-Sony VCR or satellite receiver, you must program the
to
operate
the satellite remote control. See "Programming the Remote Control" on pages 46-47.
receiver or VCR
Activate the TV remote For the satellite receive_5 press SAT/CABLE FUNCTION. For the VCR, press
contro! to operate the satellite DVD/VCR F UNCTION.
receiver or VCR
Control satellite receiver and See "Operating a Satellite Receiver" on page 48 and "Operating a VCR" on
VCR functions with the TV page 48.
remote contro!
Label video inputs to easily See the instructions for setting up Video Labels on pages 72-73.
identify equipment connected
to the TV