Siemens SIMATIC S7-400 Operating Instructions Manual page 113

Done Error ErrorID (hex) Name
0 1 804C0000
0 1 804D0000
0 1 804E0000
0 1 804F0000
0 1 80500000
0 1 80510000
0 1 80520000
0 1 80530000
0 1 80540000
0 1 80550000
0 1 80560000
0 1 80570000
0 1 80580000
0 1 80590000
0 1 805A0000
0 1 805B0000
0 1 805C0000
0 1 805D0000
0 1 805F0000
0 1 80600000
0 1 80610000
0 1 80620000
0 1 80630000
0 1 80640000
0 1 80650000
0 1 80660000
0 1 80670000
0 1 80680000
0 1 80690000
0 1 806A0000
0 1 806B0000
CP 443-1 OPC UA
Operating Instructions, 01/2017, C79000-G8976-C427-02
BadReferenceTypeIdInvalid
BadBrowseDirectionInvalid
BadNodeNotInView
BadServerUriInvalid
BadServerNameMissing
BadDiscoveryUrlMissing
BadSempahoreFileMissing
BadRequestTypeInvalid
BadSecurityModeRejected
BadSecurityPolicyRejected
BadTooManySessions
BadUserSignatureInvalid
BadApplicationSignature
Invalid
BadNoValidCertificates
BadRequestCancelled
ByRequest
BadParentNodeIdInvalid
BadReferenceNotAllowed
BadNodeIdRejected
BadNodeClassInvalid
BadBrowseNameInvalid
BadBrowseNameDuplicated
BadNodeAttributesInvalid
BadTypeDefinitionInvalid
BadSourceNodeIdInvalid
BadTargetNodeIdInvalid
BadDuplicateReference
NotAllowed
BadInvalidSelfReference
BadReferenceLocalOnly
BadNoDeleteRights
BadServerIndexInvalid
BadViewIdUnknown
Programming the OPC UA client blocks
Meaning
The operation could not be processed because all continua-
tion points have been allocated.
The browse direction is not valid.
The node is not part of the view.
The ServerUri is not a valid URI.
No ServerName was specified
No DiscoveryUrl was specified.
The semaphore file specified by the client is not valid.
The security token request type is not valid.
The security mode does not meet the requirements set by the
Server.
The security policy does not meet the requirements set by the
Server.
The server has reached its maximum number of sessions.
The user token signature is missing or invalid.
The signature generated with the client certificate is missing
or invalid.
The client did not provide at least one software certificate that
is valid and meets the profile requirements for the server.
The request was cancelled by the client with the Cancel ser-
vice.
The parent node id does not to refer to a valid node.
The reference could not be created because it violates con-
straints imposed by the data model.
The requested node id was reject because it was either inva-
lid or server does not allow node ids to be specified by the
client.
The node class is not valid.
The browse name is invalid.
The browse name is not unique among nodes that share the
same relationship with the parent.
The node attributes are not valid for the node class.
The type definition node id does not reference an appropriate
type node.
The source node id does not reference a valid node.
The target node id does not reference a valid node.
The reference type between the nodes is already defined.
The server does not allow this type of selfreference on this
node.
The reference type is not valid for a reference to a remote
server.
The server will not allow the node to be deleted.
The server index is not valid.
The view id does not refer to a valid view node.
5.10 Error numbers
113