Siemens SIMATIC S7-400 Operating Instructions Manual page 109

Done Error ErrorID (hex) Name
0 1 B0030003
0 1 B0030004
0 1 B0040001
0 1 B0050001
0 1 B0050002
0 1 B0060001
0 1 B0060002
0 1 B0060003
0 1 B0060004
0 1 B0060005
0 1 B0060006
0 1 B0060007
0 1 B0060008
0 1 B0060009
0 1 B0060010
0 1 B0070001
0 1 B0070002
0 1 B0070003
0 1 B0070004
0 1 B0070005
0 1 B0070006
0 1 B0070009
Error numbers according to IEC 61131-3 for OPC UA
0 1 002D0000
0 1 002E0000
0 1 002F0000
0 1 00300000
0 1 00960000
0 1 00A20000
CP 443-1 OPC UA
Operating Instructions, 01/2017, C79000-G8976-C427-02
GoodSubscription
Transferred
GoodCompletes
Asynchronously
GoodOverload
GoodClamped
GoodLocalOverride
GoodEntryInserted
Programming the OPC UA client blocks
Meaning
Max. number of items (64000) exceeded
Unsupported attribute "ValueRank" of a tag. The ValueRank
values (one dimensional array)and -1 (scalar) are supported.
Wrong data packet in UA_NodeReleaseHandleList
Wrong data packet in UA_Disconnect
UA_Disconnect cannot be called, because there is no con-
nection.
Wrong data packet in UA_ReadList
The length of the data to be read exceeds the maximum of
64000.
Invalid range of IndexRangeCount
Invalid IndexRange. StartIndex must not be higher than
EndIndex and EndIndex must not be higher than the array
length.
Invalid AttributeID
The read data area is too small.
Correct the data in the UDT "UAIndexRange".
Invalid string length. The value (user data) must be 254.
Invalid value of the node. The value cannot be read in in S7
tag.
Invalid characters in the string
Replace the invalid characters with supported characters.
Invalid operand area in a read or write job: Arrays of inputs,
arrays of outputs, arrays of memory bits, arrays of local data
and arrays of local data of the predecessor block are not
permitted.
Wrong data packet in UA_WriteList
The length of the data to be written exceeds the maximum.
Invalid range of IndexRangeCount
Invalid IndexRange. StartIndex must not be higher than
EndIndex and EndIndex must not be higher than the array
length.
Invalid AttributeID
The data area is outside the permitted area.
Invalid character in the string
The subscription was transferred to another session.
The processing will complete asynchronously.
Sampling has slowed down due to resource limitations.
The value written was accepted but was clamped.
The value has been overridden.
The data or event was successfully inserted into the historical
database.
5.10 Error numbers
109