Table of Contents
Advertisement
4.3.2
Mounting with rigging points
The EVC-1122-VI can also be suspended from the three insert points on the top of the
loudspeaker enclosure. A safety cable should always be attached to one of the rigging points.
EVC loudspeakers are designed to be installed individually. There are no factory-approved
accessories for creating clusters by connecting an EVC loudspeaker to any other loudspeaker.
Figure 4.2: Suspending EVC systems, including a safety cable
Eyebolt accessory kits
EVC loudspeakers do not ship with eyebolts. To suspend the speaker, it is necessary to order
one of the accessory eyebolt kits (sold separately).
▪
Installing the eyebolts
Caution!
No eyebolt should be mounted in the sides of an EVC enclosure in order to suspend a system.
!
Doing so may result in damage to the enclosure, leading to installation failure, and personal
injury.
Figure 4.3: Eyebolts installed incorrectly in the sides of an enclosure in order to suspend it from above
Electro-Voice
EBK-M10-3PACK: optional eyebolt kit, consisting of three M10 shoulder eyebolts and
three fender washers, used when eyebolts are needed to suspend any of the full-range
EVC loudspeakers. For more information see, EBK-M10 Eyebolt Attachment Kit
Installation Instructions (F.01U.303.870).
Installation manual
en
11
2018.01 | 01 | F.01U.345.997
Advertisement
Table of Contents
