How To Use The Map - Audi MMI Navigation System plus Operating Manual

How to use the map

Applies to vehicles: with navigation system
Fig. 42 Map with crosshairs switched off
Fig. 43 Map with crosshairs switched on
– To call up the map: Press the
repeatedly until the map appears.
– To switch on the crosshairs: Press the rotary
pushbutton while the map is being dis-
played.
– To switch off the crosshairs: Press the
button.
BACK
Crosshairs switched off:
Orientation: The map is displayed either
1
from the north position or from the driv-
ing position.
Scale: Turn the rotary pushbutton clock-
2
wise/anti-clockwise to zoom in or out.
Distance to destination/stopover
3
Calculated time of arrival at destination/
4
stopover
Speed display
5
Altitude display
6
Location of the vehicle
7
oder Name, Abteilung, Datum
1)
Applies to vehicles without camera-based speed limit
display only.
button
NAV
1)
Display of upcoming turn-off
8
Additional information ð page 52
9
Crosshairs switched on:
Additional information on the point selec-
10
ted with the crosshairs: If you use the
crosshairs to select a point on the map,
any existing information on this location,
e.g. the address, will be displayed.
Display of position coordinates of the
11
crosshairs (longitude/latitude)
Moving along the route: This function can
12
be used while route guidance is activated.
Turn the rotary pushbutton clockwise/an-
ti-clockwise to move the map along the
current route.
Destination details menu: If available, de-
13
tails on the point selected with the cross-
hairs are displayed (e.g. address). The
point on the map selected with the cross-
hairs can be set as a destination or stop-
over, stored in the directory and called up
on the telephone.
Calculating alternative routes
14
ð page 53
Map contents such as traffic information,
15
favourite destinations or restaurants
Navigation 49