Starting/Stopping Route Guidance - Audi MMI Navigation System plus Operating Manual

48 Navigation
Entering a destination via the
coordinates
Applies to vehicles: with navigation system
Select:
NAV
►
nation > Address > Coordinates.
Select and confirm the Latitude and Longi-
►
tude coordinates. Start the route guidance
function.
Entering a stopover/tour plan
Applies to vehicles: with navigation system
You can enter up to nine stopovers directly in
the tour plan or using the various ways of en-
tering destinations.
Fig. 41 Tour plan
Important: You must have entered a destina-
tion ð page 45.
Select:
NAV
►
– To enter a destination as a stopover: Select
and confirm the symbol for entering a stop-
over ð Fig. 41. Enter a destination
2
ð page 45. Select and confirm Set as stop-
over in the Destination details menu.
– To change a tour plan: Press the control
button for Tour. Select and confirm the des-
tination/stopover and then select Change,
Move, Delete or Start tour plan from here.
– To store a tour plan: Press the control but-
ton for Tour. Select and confirm Tour mem-
ory and then Store tour plan. Enter a name.
– To load/delete a tour plan: Press the control
button for Tour. Select and confirm Tour
memory and then Load tour plan/Delete
tour plan.
button > control button Desti-
button > control button Tour.
The following information is displayed in the
legend menu of the tour plan ð Fig. 41:
Location of the vehicle
1
Symbol for entering a stopover
2
Stopover entered
3
Destination
4
Starting/stopping
route guidance
Applies to vehicles: with navigation system
– To enter a new destination and start route
guidance: Select
NAV
ton Destination > enter destination > Start
route guidance.
– To restart/stop the last route guidance: Se-
lect button > control button Destina-
NAV
tion > Start/Cancel.
When you enter a new destination, the follow-
ing additional functions are available in the
Destination details menu ð page 46, Fig. 39:
Calculate alternative routes: Three suggested
routes are calculated for the destination cur-
rently entered. The legend menu will show in-
formation on the alternative route, such as
the distance to the destination and the calcu-
lated arrival time.
Enter special destination in town: With this
option you can look for e.g. tourist attractions
or public buildings (hospital, cinema, recrea-
tion areas, etc.) in the vicinity of the town en-
tered. The special destination can be set di-
rectly as the destination.
Select centre: The navigation system calcu-
lates a route leading to the centre of the se-
lected town/district.
Destination on map: The destination is shown
on the map.
button > control but-