Directory; Calling Up The Directory; Storing A Contact - Audi MMI Navigation System plus Operating Manual

Directory

Calling up the directory

Applies to vehicles: with phone pre-installation
After a mobile phone has been bonded suc-
cessfully, the contacts from the mobile phone
are automatically imported into the directory
of the MMI system.
Fig. 33 List of contacts
Select:
TEL
►
– To select a contact: Select and confirm a
contact in the directory. The address card
will be displayed.
The contacts are displayed in alphabetical or-
der; they can be sorted according to first
name/surname ð page 44 and are displayed
together with a symbol indicating where they
are stored ð Fig. 33:
Public MMI directory: These contacts can
1
be seen and used by any user, irrespective
of which mobile phone is connected.
Private MMI directory: These contacts are
2
only visible if the corresponding mobile
phone is connected.
SIM card
3
Mobile phone
4
You can bond up to four different mobile
phones to the MMI system, allowing you to
manage up to four private directories in addi-
tion to the public directory.
If there is no memory capacity left for directo-
oder Name, Abteilung, Datum
ries and you bond another mobile phone, a
message will appear asking you to replace the
contacts from one of the phones. If you select
the option Restricted use of telephone, only
button > Directory.
the contacts from the mobile phone or SIM
card and the local MMI memory (public) will
be available.
You can open the directory via the Telephone*
menu and via the Navigation* menu.
Note
– Please pay attention to any synchronisa-
tion queries on your mobile phone. You
must confirm any synchronisation quer-
ies from the directory before the con-
tacts can be loaded from your mobile
phone into the MMI directory.
– Which contacts are displayed on the
MMI depends on the mobile phone you
are using. For more information on
which mobile phones are supported,
please go online (e.g. www.audi.com/
bluetooth) or contact an Audi dealer.
– In certain cases, contacts from a mobile
phone may not be transmitted in alpha-
betical order. If there are too many en-
tries, contacts with certain initial letters
may not be displayed on the MMI sys-
tem.
– The contacts in the local MMI memory
(public) are visible anytime and are
therefore not protected against access
by other users.

Storing a contact

Applies to vehicles: with phone pre-installation
Fig. 34 Creating new contact
Select: button > Directory > New con-
TEL
►
tact.
Directory 41
