During A Telephone Call; Storing A Telephone Number - Audi MMI Navigation System plus Operating Manual

on hold and to answer the incoming call. If
you select Ignore, the incoming call will be
declined.
Caller information: Depending on whether
the caller is stored in the directory and wheth-
er the telephone number is transmitted with
the call, the name, the telephone number or
Unknown will appear on the MMI display and
on the driver information system.
Note
– Depending on your mobile phone and
service provider, you may be able to an-
swer incoming calls while you are already
talking on the phone ð page 37. The
active telephone call will then be placed
on hold automatically.
– The audio source is muted automatically
when you make or receive telephone
calls.
– If the MMI display was switched off, it
will be switched on automatically when
there is an incoming call.

During a telephone call

Applies to vehicles: with phone pre-installation
Important: You must be talking on the phone.
Select: Control button Options.
►
– To make a further call: Select Further call >
Directory or Call list > entry in list.
– To answer a further call when you are talk-
ing on the phone and have another call on
hold: Select Replace. The current call will be
replaced by the incoming call.
Other functions are:
Switch microphone off: If you select and con-
firm this option, the caller will no longer be
able to hear you; you will still be able to hear
the caller.
Hold/Resume: You can put a call on hold and
oder Name, Abteilung, Datum
retrieve it later from the hold queue. On hold
appears on the MMI display, together with the
amount of time the call has been on hold.
Switch: You can switch between two phone
calls (one of them will be on hold at any given
time). Select End call to end whichever call is
active. The call on hold will remain in the hold
queue and can be continued by pressing the
control button for Options and selecting Re-
sume.
Conference: Up to five callers and one caller
on hold can take part in a conference (depend-
ing on the network service). To set up a fur-
ther call, select Hold to place all the members
of an existing conference on hold. Press the
Options control button. Select and confirm
Further call and choose a telephone number
from the Call list or the Directory. Alterna-
tively, select Enter number. To add this caller
to the existing conference, select Conference.
Select Resume if you want to retrieve all par-
ticipants in an existing conference from the
hold queue. Show conference participants al-
lows you to display the participants.
Note
– The option Call waiting must be activa-
ted on your mobile phone for you to be
made aware of incoming calls during a
conversation.
– The options available during a call may
vary depending on the mobile network
service provider and the mobile phone
you are using. For more information,
contact your service provider.
– The display for the incoming call may re-
main for several seconds afterwards; this
depends on the type of mobile phone
you are using. Should you use the func-
tion Replace or Ignore in the MMI sys-
tem during this time, it is possible that
the active call will be ended.
Storing a telephone
number
Storing a new telephone number
Applies to vehicles: with phone pre-installation
You can store a new telephone number as a
contact in the directory ð page 41.
Telephone 37