Terms Of Guarantee - VGE XCLEAR User Manual

1. Determine the desired location for the unit and secure the supports (A).
EN
2. Saw the transparent hose connections (B) to the required diameter and screw them,
including the rubber sealing rings (C), onto the device (D).
3. Unscrew the nut (E) of the housing (D) unit and install the lamp (F) in the lamp holder (G).
4. Screw the nut (E) back on the housing (D) unit and attach the hoses using hose clamps
(not included).
5. Operate the pump and check the system for free water flow and leaks. In case of a
leak in the hose connections, do not use force.
6. Operate the UV-C device and check if the light is on. You can see the light through
the transparent connectors that are UV-C resistant.
DISMANTLING
Always switch off the power and water supply during maintenance/dismantling of the
device. The device must be cleaned at least twice a year. When algae growth or calcium
deposits increase, the quartz glass tube (H) should be cleaned.
1. Loosen the hoses and let the water run out of the unit.
2. Unscrew the nut (E) with the unit bulb and if necessary replace the lamp (F).
3. Carefully remove the quartz glass, using for example a coin. Never use force!
4. Clean the quartz glass using appropriate cleaning materials.Always use a soft cloth to
avoid scratching the quartz.
5. When replacing the quartz in the housing unit ensure that the sealing rings (I) are
correctly positioned.

TERMS OF GUARANTEE

The guarantee of this product covers manufacturing faults for a period of 24 months
following the date of purchase. The lamp and the quartz glass are not included in
this guarantee. Claims under the guarantee can only be considered if the product is
returned post-paid together with a valid purchase receipt. Repairs under the guarantee
may exclusively be carried out by the supplier. Guarantee claims that are caused by
errors in the installation or operation of the device will not be considered. Defects
originating from poor maintenance are also excluded from the guarantee. The supplier
will in no way whatsoever be held responsible for any damage caused by the incorrect
operation of the product. The supplier will not be liable for any consequential damage
caused by the breakdown of the device. Complaints regarding transportation damage
will only be considered if the damage was established or confirmed on delivery by the
carrier or the postal authorities. A claim can only be made against the carrier or the
postal authorities if this has been done.
| MANUAL XCLEAR UV-C ECONOMY
6