Installation - Siemens SIWAREX JB Instruction Manual

Revision 03.06

2.3 Installation

The SIWAREX JB junction box can be mounted in any position. It should
preferably be mounted horizontally. It is fixed with four M6 cylinder head screws.
The dimensions of the fastening holes are shown in fig. 2-6, page 12.
CAUTION
Please check before closing the cover that there is no dirt or cable scraps in the
housing that could cause malfunctions or short circuits.
CAUTION
The device protection degree is only guaranteed when the housing is closed.
The lid must be mounted, necessary cable glands must be mounted and
tightened. Unused openings for screw cable glands must be sealed with the
sealing plugs provided. Please check that the sealing surfaces are clean and
the o-rings are correctly in place on screw cable glands and sealing plugs.
SIWAREX JB junction box in aluminum housing – Instruction Manual
A5E00400544B
Installation/Assembly
11