Maintenance And Cleaning - kiwy SF01 Instruction Manual

The manufacturer declines any responsibility for possible marks due to
the normal use of this child seat.
Malfunctions
- In case of accidental falls or visible damages, contact your dealer.
- Any malfunction of the harness might compromise the safety of the
child.
- In case of abnormal operation of the buckle, or any other part of the
seat, do not use it and contact your dealer.

Maintenance and Cleaning

ATTENTION: No part of the SF01 seat requires lubrication, a good
cleaning is sufficient to ensure the correct functioning of its parts.
Cleaning of the covers: remove the various components of the fabric
covers (see instructions here below) and wash at 30°.
Do not use chemical cleaners, do not wring and do not tumble dry. Do
not iron.
Follow the instructions on the washing label.
The plastic parts can be easily cleaned using only soap and water, never
use solvents, alcohol or harsh detergents.
Covers' removal:
Loosen entirely the harness' straps.
Pull the tilting lever, recline the seat to the maximum inclination.
In the rear of the backrest, unhook the two straps (Fig. 25) and extract
them from the front through the slots in the backrest, as well as through
the shoulder straps' pads, from the front of the child seat (Fig. 26).
Unfasten the buckle and open the harness straps.
Remove the shoulder straps' pads.
Remove the cover from the crotch belt pad and from the seat.
Cover replacement
To fit back the cover do the same operations you did to remove it in the
16