kiwy SF01 Instruction Manual page 11

I - Fabric cover
J - Buckle
K - Shoulder protection pads
L - Harness release/control push-button
M - Retractable spacer
N - Reclining adjustment lever
O - Q-Fix System for Group 0 +
P - Isofix connectors' guides
Q - Q-Fix System for Group 1
Check your vehicle seat belt
Important:
Always use the seat belt of the vehicle to fix the SF01 child seat,
both in the travel direction as well as in the opposite direction of travel.
The connectors for the Isofix anchoring points are additional fitting
hardware that still require seat belt in the vehicle.
The position of the safety belt buckle can affect the child seat correct
installation and its stability; thus, should it be positioned as shown in
Fig.9a, this child seat is not suitable to be installed in your vehicle's seat
or in your vehicle.
Instructions for the installation in the opposite direction of
travel (from birth to 13 kg)
For children from birth up to 9 kg, the SF01 Q-Fix child seat MUST be
oriented in the rearwards facing direction and on a compatible vehicle
seat, as indicated in the vehicle 'user manual' .
The SF01 Q-Fix seat allows keeping the child facing backwards until
reaching a weight of 13 kg.
In this condition, the SF01 Q-fix child seat shell MUST be set to the
maximum reclined position and the rise retractable spacer MUST be
rotated into the position shown in Figure 11.
9