Connect Dh-485 Devices To The Interface Converter's Rs-485 Port - Allen-Bradley 1747-UIC Installation Instructions Manual

Connect DH-485 Devices to the Interface Converter's RS-485 Port

SLC 500 Fixed Controller
SLC 5/01, SLC 5/02, and SLC
5/03 (Channel 1) Controller
Connect the Following DH-485 Equipment to the RS-485 Port
SLC 500 Fixed Controller
SLC 5/01, SLC 5/02, and SLC 5/03 (Channel 1) Controllers
1747-AIC Isolated Link Coupler
PanelView 300 and higher Terminals with DH-485 Ports
ATTENTION
Universal Serial Bus (USB) to DH-485 Interface Converter
To avoid ESD damage to the 1747-UIC interface converter, always
connect it to the properly grounded DH-485 device or interface
prior to plugging the USB cable into the computer's USB port.
PanelView 300
and Higher
Terminal
USB (DF1)
CAT SER FRN
1747-UIC A X.X
USB
USB to DH485 OK
INTERFACE CONVERTER
DH485
LISTED I.T.E.
RS485 (DH485)
SW
Mfg
XXXX
N223
1747-UIC
DH-485
1747-AIC
Peripheral
CPU
Power
Publication 1747-IN063C-EN-P - January 2006
Personal
Computer with
USB Port
Use Cable
1747-C13
5