Change The Station Number; Interpret The Led Indicators - Allen-Bradley 1747-UIC Installation Instructions Manual

14 Universal Serial Bus (USB) to DH-485 Interface Converter
3. Click Change/Remove and follow the instructions.
4. Click Continue and then click Finish.

Change the Station Number

If you want to change the station number when the 1747-UIC interface converter is
already online to a DH-485 network with an existing station number, you must:
1. Configure the new station number in the RSLinx DF1 driver.
2. Stop the RSLinx DF1 driver.
3. Unplug the 1747-UIC interface converter from the computer's USB port.
4. Plug the interface converter back into the computer's USB port.
5. Start the RSLinx DF1 driver.
Now, when you go online through the 1747-UIC interface converter, it will use the
new station number.

Interpret the LED Indicators

The interface converter has three green LED indicators, which indicate the
following when lit:
USB (DF1)
CAT SER FRN
1747-UIC A X.X
USB
OK
USB to DH485
INTERFACE CONVERTER
DH485
DH485
LISTED I.T.E.
CONVERTER
RS485 (DH485)
SW
Mfg
XXXX
N223
RS232 (DH485)
Publication 1747-IN063C-EN-P - January 2006
FRN
X.X
LED Indicator
OK (solid)
USB
OK
USB (flashing)
DH485
DH-485 (flashing)
Description
The USB port is powered and operational.
The USB port is transmitting or receiving
DF1 data.
The interface converter is actively passing
token or data on DH-485 network.