Remote Control - Sanyo MCH-S970F Instruction Manual

REMOTE CONTROL
I
NOTE:
Inserting batteries
The buttons on the remote control perform functions
1.
2.
identical to similarly marked buttons on the front panel
of the unit.
Controls
a @~
6
7
1
2
3
4
1. Track number buttons (TRACK NUMBER)
2. Stop button (n)
3. Play/Pause button (>/11)
4. Skip/Search buttons (M/4 , */W)
5. Disc select button (DISC SELECT)
6. Random play button (RANDOM)
7. Disc check button (DISC CHECK)
8. Memory button (MEMORY)
9. Repeat play button (REPEAT)
Two
"AAIHP71R6"
batteries
(not supplied)
NOTE:
Always remove the batteries if the remote control is not to
be used for a month or more. Batteries left in the unit may
leak and cause damage.
-~
When the batteries have become discharged, they
must be disposed of in a safe manner that complies
with all applicable laws.
I .1
The remote control emits an invisible infrared beam,
which carries the control signals to the sensor window on
the front panel of the unit. Because the infrared beam
travels in a straight line, the Transmitter Window on the
remote control must be pointed toward the infrared sen-
sor window on the unit. Make sure that there are no
objects between the remote control and the unit that
might block the beam.
Remote control range
Use the remote control within an angle of 15° to the left
and right horizontally and over distances up to approxi-
mately 7 meters.
(-J~7meters
Within approx.
n
,....
" ~..
000
000
000
00
El
,.., . . . . .
C& pe"~
000
., ,., ,,,
~g
-5-