Speaker Placement; Connecting The Speakers - Sanyo MCH-S970F Instruction Manual

.- -.
SPEAKER PLACEMENT
i
.—
This unit features a detachable speaker system. The left
and right speaker enclosures can be detached from the
main unit, and placed where desired. When the speaker
enclosures are attached to the main unit, the MCH-S970F
can be carried to any location desired.
CONNECTING THE SPEAKERS
Speaker terminals (SPEAKERS)
These terminals will accept speakers with an impedance
of 3 to 8 ohms. The speaker wire should be connected to
the speaker terminals with the proper polarity. The red
terminal ispositive (+), andthe black terminal
is negative
(–). The speaker wire with white stripe is positive (+) and
the other is negative (–).
NOTE:
1.
2.
3.
Ifspeakerconnections are made with incorrect polarity,
proper stereo reproduction will not be obtained.
Twist the two solid black wires together.
Push the terminal button and insert the speaker wire
into the opening.
Release the terminal button. The speaker wire is se-
cured.
——l
To detach the speaker enclosures
1.
2.
3.
4.
Push the SPEAKERS terminal button and remove the
speaker wire.
Push the RELEASE lever as illustrated and push the
speaker enclosure toward the front.
Extend the speaker wire to the desired length.
Connect the speaker wire to the SPEAKERS terminals.
To attach the speaker enclosures
1. Push the SPEAKERS terminal button and
remove the
speaker wire.
2. Attach thespeaker enclosures to the main unit and slide
the speaker enclosures to the locked position.
3. Place the excess speaker wire onto the speaker wire
guide on the back of each speaker enclosure.
4. Connect the speaker wire to the SPEAKERS terminals.
-3-