Nexa LCMR-300 User Manual

▍MODEL:

* LCMR-300 (300W Incandescent lamp)
* LCMR-1000 (1000W Resistive load)

▍FEATURES:

* Learning function, easy operation.
* Receiver has 6 memory settings, no memory loss forever.
* Red LED indicator for POWER ON and MEMORY SETTINGS.
* Learning function Receiver compatible to all ARC transmitters (including learning transmitter
and code switch transmitter).
* Remote control till 30M in open area.

▍INSTALLATION:

Controller (Receiver)
* Disconnect main power before installation.
* Screw holder of receiver can be cut off if necessary.
* Connect AC wire and load (lamp) to receiver
block terminal (fig. 1).
* Connect main power on.
* LED indicator on receiver should light on.

Remote control (Transmitter)

Learning system transmitter (fig. 2)
* Learning system has million codes which is house
code.
* The million codes are set up in each transmitter
before shipping out of factory.
* Million code of each transmitter will have very few
chance to be the same with other transmitters.
* LYCT-505 can remote control max. 16 receivers.
LED indicator on the transmitter will light on
while pressing the button.
* LWST-605 can control 2 receivers.
Code switch transmitter (fig. 3)
* YCT-100 & YCT-603 max. control 16 receivers (under a house code)
LED indicator on the transmitter will light on while pressing the button.
* WST-512 can control 1 receiver only.
 Page 1

USER MANUAL