Table of Contents
Advertisement
8
Barrel Temperature Control Module
2. Make certain the color of the RTB mathces the color band on the module.
ATTENTION
!
3. View the write–on label to identify the slot, chassis and module type.
4. Align the RTB retaining screws with the mating connector on the module. Be careful
not to damage the CJC sensors.
CJC sensors
5. Press the RTB firmly onto the connector contacts.
6. Alternately tighten the two retaining screws to avoid cracking the RTB. Tighten to a
maximum 6-8 inch-pounds.
Publication 1746-IN020B-EN-P - July 2002
Inserting a wired RTB on an incorrect module can damage the module's
circuitry when power is restored.
SLOT
MODULE
RACK
RTB
retaining screws
Advertisement
Table of Contents
