Table of Contents
Advertisement
4
Barrel Temperature Control Module
How to Get the Related User Manual
The following table describes the related user manual that is available for this module. To
order a copy or to view or download an online version, visit The Automation Bookstore at:
www.theautomationbookstore.com
For information about:
Programming, calibrating and
troubleshooting the barrel
temperature module
Determine the Module's Chassis Power Requirement
When computing power supply requirements, add the values shown below to the
requirements of all other modules in the SLC
power supply:
5V dc amps
24V dc amps
0.110
0.085
Choose a Module Slot in a Local I/O Chassis
Place your module in any slot of an SLC 500
for the left–most slot (slot 0), reserved for the SLC processor or adapter modules.
IMPORTANT
Installation Considerations
Most thermocouple–type applications require an industrial enclosure to reduce the effects of
electrical interference. Thermocouple inputs are highly susceptible to electrical noises due to
the small signal amplitudes (microvolt/C°). Isolate them from other input wiring and
modules that radiate electrical interference.
Group your modules within the I/O chassis to minimize adverse effects from radiated
electrical noise and heat. Consider the following conditions when selecting a slot location.
Position the module away from modules that:
• connect to sources of electrical noise such as relays and ac motor drives
• generate significant heat, such as 32–point I/O modules
Publication 1746-IN020B-EN-P - July 2002
See this document:
Barrel Temperature Control Module
User Manual
For proper operation, use this module with a local processor. The
module is not designed to operate in a remote chassis.
Publication number:
1746-UM010
chassis to prevent overloading the chassis
®
TM
module, or modular expansion chassis, except
Advertisement
Table of Contents
