Table of Contents
Advertisement
2
Barrel Temperature Control Module
Important User Information
ecause of the variety of uses for the products described in this publication, those responsible for
B
the application and use of these products must satisfy themselves that all necessary steps have been
taken to assure that each application and use meets all performance and safety requirements,
including any applicable laws, regulations, codes and standards.
In no event will Rockwell Automation be responsible or liable for indirect or consequential
damage resulting from the use or application of these products.
Any illustrations, charts, sample programs, and layout examples shown in this publication are
intended solely for purposes of example. Since there are many variables and requirements
associated with any particular installation, Rockwell Automation does not assume responsibility or
liability (to include intellectual property liability) for actual use based upon the examples shown in
this publication.
TM
Allen-Bradley
publication SGI-1.1, Safety Guidelines for the Application, Installation and Maintenance of
Solid-State Control (available from your local Rockwell Automation office), describes some
important differences between solid-state equipment and electromechanical devices that should be
taken into consideration when applying products such as those described in this publication.
Reproduction of the contents of this copyrighted publication, in whole or part, without written
permission of Rockwell Automation, is prohibited.
Throughout this publication, notes may be used to make you aware of safety considerations. The
following annotations and their accompanying statements help you to identify a potential hazard,
avoid a potential hazard, and recognize the consequences of a potential hazard:
WARNING
!
ATTENTION
!
IMPORTANT
Publication 1746-IN020B-EN-P - July 2002
Identifies information about practices or circumstances that can cause
an explosion in a hazardous environment, which may lead to personal
injury or death, property damage, or economic loss.
Identifies information about practices or circumstances that can lead
to personal injury or death, property damage, or economic loss.
Identifies information that is critical for successful application and
understanding of the product.
Advertisement
Table of Contents
