Page 4
General Thank you for choosing an Etac product. At Etac we strive to improve our products all the time and therefore we reserve the right to make changes to prod- To avoid accidents and injury when moving and handling ucts without prior warning. All measurements given on the products, read the manual carefully.
Page 5
Positioning Position the wheelchair at an angle of about 45° to the bed. Position the E-Board so that the grey non-slip strips on the backside lie securely against the wheelchair seat and the surface of the opposite surface. Positioning is easier if the client either leans against the...
Page 6
Read these instructions carefully. Never use the E-Board under wet conditions as the un- derside of the board may become slippery in contact with It is important that carers receive instruction in manual water.
Page 7
Articles Article no. Description Size (cm) IM404 E-Board B33 x L60 x H0.5 IM405 E-Board B33 x L75 x H0.6 IM408 E-Board B25 x L60 x H0.5 IM410 E-Board B20 x L45 x H0.5 Combinations Article no. Description Size (cm)
Need help?
Do you have a question about the E-Board and is the answer not in the manual?
Questions and answers