Repair Information
6-4. ADF Rubber
1 . Before you remove the rubber, you should
r emove:
-OPE cover (see page 6-3)
2 . Push the ADF stopper up from the bottom side of
the scan frame. When the stopper is released,
r emove the ADF rubber.
6-5. OPE Board
1 . Before you remove the board, you should
r emove:
-OPE Cover (see page 6-3)
2 . Remove five screws, then remove the scan upper
frame.
6-4
3 . Remove eleven screws securing the board, then
r emove the board .
Samsung Electronics