Table of Contents
Advertisement
6.
Repair Information
6-1. Removal Procedures
Cautions:
• Be sure to unplug the power cord whenever you are working on the machine with one of the covers
r emoved.
• Be sure t o remove the toner cartridge before you re p a i r p a r t s .
• The close proximity of cables to moving parts makes proper routing a must. If components are removed or
r eplaced, any cables disturbed by the procedure must be replaced as close as possible to their original
positions. Before removing any component from the machine, note the cable routing that will be aff e c t e d .
• If the machine is equipped with handset, remove the handset and cradle.
Releasing Plastic Latches
Many of the parts are held in places with plastic latches.
The latches bre a k e a s i l y ; release them care f u l l y. To remove
such parts, press the hook end of the latch away from
the part to which it is latched.
6-2. White Roller
1 . L i f t t h e c o n t rol panel using hand.
2 . Push the bushing on both ends of the ro l l e r
slightly inward , t h e n ro t a t e i t u n t i l i t reaches the
s l o t . T h e n l i f t t h e ro l l e r o u t .
Samsung Electronics
Note : Check the ro l l e r f o r a n y d i r t . I f d i r t y, w i p e i t
o ff with soft cloth dampened with water. I f
t h e roller is heavily worn, replace it with a
new one.
w h i t e ro l l e r
6-1
Advertisement
Table of Contents
