New Content Level - THOMSON SpeedTouchTM706 User Manual

5.5.12 New Content Level

Accessing the New
Content Level page
Procedure
Content level creation
Content level
configuration
E-DOC-CTC-20051017-0148 v1.0
On this page you to create a new content level. Proceed as follows to access this
page:
1
In the Toolbox menu, click Parental Control.
2
In the upper right corner, click Configure.
3
In the Pick a task list, click Create a new content level.
To apply a new content level, you must perform the following actions:
1
Content level creation
2
Content level configuration
3
Content level definition
4
Content level activation
!
You can create up to 16 content levels.
Proceed as follows:
1
In the Name box, type a name for the new content level.
2
In the Description box, type a short text to describe what this security level will
do.
3
Click Next.
The Configuration section appears.
Proceed as follows:
1
Click:
Clone Existing Level to start from a previously created content level.
If no levels have been defined before, this option will not be
shown.
Black List to allow all Web sites by default.
White List to block all Web sites by default.
2
Click Next.
The Content level definition section appears.
Chapter 5
SpeedTouch™ Web Interface
87