Unvented Cast Iron Gas Stoves
Log & Rock Wool Placement
!
The positioning of the logs is critical to the safe and
clean operation of this heater. Sooting and other
problems may result if the logs are not properly
and firmly positioned in the appliance. Never add
additional logs or embellishments such as pine cones,
vermiculite or rock wool to the heater. Only use the
logs supplied with the unit.
Failure to position the parts in accordance with
diagrams below or to use only parts specifically
approved for this heater may result in property
damage or personal injury.
Rock Wool Installation - CSVF30 / VFCS30
1. Break rock wool into dime-sized pieces.
2. Place rock evenly across rock wool tray and
front burner as shown in Figure 13.
• Rock wool depth must not be more than
1".
• Do not place rock wool past the bend in rock wool
tray.
• Do not place rock wool on rear burner.
!
Rock wool must be placed correctly. Placing rock
wool in wrong area will create high carbon monoxide.
Bend in Rock
Wool Tray
Rock Wool
R E
M O
T E
C O
N T
R O
L
Rock Wood Tray
Figure 13 - Rock Wool Installation
LG939
CSVF rock wool
14
WARNING
WARNING
P IL
O T
O F
F
Monessen • Concorde VF Installation Manual_R11 • 02/17
3-90-58D6002