Specifications - HIOS BLT-AY-71 Instruction Manual

Specifications

Please note that this unit is subject to change for improvement without any prior notice.
Model
Primary input power source
Power supply capacity (fuse
capacity)
Secondary output voltage
Dimensions
Weight
Compatible
screwdriver
(One-unit control)
Rotation setting
The number of rotations of
automatic screwdriver
(r.p.m)
Rotation control directions
Accessories
Note:
◦ T orque-up for reverse rotation is not available for a standard automatic screwdriver because the one-way clutch
works.
◦For tightening reverse thread screws, a special automatic screwdriver for reserve thread screws is required.
◦ When using the forward rotation screwdriver for reverse rotation, set the reverse torque-up to U0 or d0 (for
example, when engaging a screw with the bit)
36
BLF BLF-2000/BLF-5000
PGF PGF-3000/PGF-5000
BLF-2000/BLF-5000 (See P.12)
PGF-3000/PGF-5000 (See P.14)
BLT-AY-61
AC100 to 240V (47-63Hz)
100W 3A / 250V (1 spare fused below AC-Inlet)
LOW: 5V to 15V, HI: 20V to 30V (11 steps each)
See the outline drawing.
1.75kg
LOW: 05 to 15, HIGH: 20 to 30 (11 steps each)
Forward and reverse*
Power cord: 1 (1.8m with GND (3L2P cord))
Terminal block connector: 1
BLT-AY-71
BLF-7000/BLF-7000X/BLF-7025X
PGF-7000
BLF-7000 series (See P.13)
PGF-7000 (See P.14)