Torque Up Settings - HIOS BLT-AY-71 Instruction Manual

Torque Up Settings

Most customers are undoubtedly experienced in driving a car, and are aware that cars traveling up a slope at a
high speed will end up going over the mountain even when the brakes are applied, while cars traveling at a low
speed will come to a stop before reaching the top of the mountain when the brakes are applied.
The automatic brushless screwdriver BLF-series uses a system that traverses the lobe of a mechanical cam to
apply torque to screws. To ensure that torque is applied to the bit accurately, a clutch is used when traversing the
cam. The timing of the application of the brake when the bit is rotating at high speeds and low speeds is required
to be adjusted to traverse the lobe of the cam.
The BLT-AY-61/BLT-AY-71 controller is designed to control the rotational speed of the driver over a large range of
speeds from low to high, as well as to allow settings for torque up with DOWN trigger at low speeds and UP
trigger at high speeds.
Applying the brakes here at a high speed will result in
the car stopping past the top of the mountain.
The brakes are applied at a low speed
here.
15