HIOS BLT-AY-71 Instruction Manual page 20

■ Timing Chart 03
Start Type
Pulse start
Use "Pulse input" for the
FOR input to rotate the
driver
FOR input
RESET input
FOR
Bit rotation
REV
Screw condition
Torque up
FINISH output
2WS input
REV input
20
Impact setting value
FOR/ FOR/
HIGH LOW
ー d1
*Use "Pulse input" of 100 mS or more
Freely rotate the bit to
mesh with the screw
When the cam is overcome
and torque up operation
has started
2WS setting Bit rotation
REV/ REV/
HIGH LOW
ー ー LOW only
Use "Pulse input" for the
RESET input to stop the
rotation of the driver
At the next START when
FINISH output is OFF
FOR only
At RESET when
FINISH output is OFF