System Battery - HP ProLiant BL685c G6 Maintenance And Service Manual

Install the heatsink.
8.
Install the front panel/hard drive cage assembly
9.
34), if removed.
Install the SAS controller
10.
Install the hard drives
11.
Install the access panel
12.
Install the server blade
13.

System battery

If the server blade no longer automatically displays the correct date and time, you may need to replace
the battery that provides power to the real-time clock. Under normal use, battery life is 5 to 10 years.
WARNING:
pentoxide, or an alkaline battery pack. A risk of fire and burns exists if the battery pack is not
properly handled. To reduce the risk of personal injury:
Do not attempt to recharge the battery.
•
Do not expose the battery to temperatures higher than 60°C (140°F).
•
Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
•
Replace only with the spare designated for this product.
•
To remove the component:
Power down the server blade (on page 24).
1.
Remove the server blade (on page 24).
2.
Remove the access panel
3.
Identify the battery location
4.
("SAS controller" on page 30), if removed.
("Hard drive" on page 26), if removed.
("Access panel" on page 25).
("Remove the server
The computer contains an internal lithium manganese dioxide, a vanadium
("Access panel" on page 25).
("System board
("Front panel/hard drive cage
blade" on page 24).
components" on page 60).
Removal and replacement procedures 43
assembly" on page