Configuring VTP
Example: Creating the VTP Password
The follow is an example of creating the VTP password.
Switch(config)# vtp password mypassword hidden
Generating the secret associated to the password.
Switch(config)# end
Switch# show vtp password
VTP password: 89914640C8D90868B6A0D8103847A733
Where to Go Next
After configuring VTP, you can configure the following:
• VLANS
• VLAN Trunking
• VLAN Membership Policy Server (VMPS)
• Voice VLANs
Additional References
Related Documents
Related Topic
For complete syntax and usage information for the
commands used in this chapter.
Standards and RFCs
Standard/RFC
—
MIBs
MIB
All supported MIBs for this release.
OL-29065
Document Title
Catalyst 2960-X Switch VLAN Management
Command Reference
Title
—
MIBs Link
To locate and download MIBs for selected platforms,
Cisco IOS releases, and feature sets, use Cisco MIB
Locator found at the following URL:
http://www.cisco.com/go/mibs
Catalyst 2960-X Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX
Example: Creating the VTP Password
37