Reconfirming Vlan Memberships - Cisco Catalyst 2960 series Configuration Manual

Configuring VMPS
Command or Action
Step 4
switchport access vlan dynamic
Example:
Switch(config-if)# switchport access vlan dynamic
Step 5 end
Example:
Switch(config)# end
Step 6
show interfaces interface-id switchport
Example:
Switch# show interfaces gigabitethernet 1/0/1
switchport
Step 7
copy running-config startup-config
Example:
Switch# copy running-config startup-config
Related Topics
Dynamic VLAN Assignments, on page 82
Dynamic-Access Port VLAN Membership, on page 83
Example: VMPS Configuration, on page 91

Reconfirming VLAN Memberships

This task confirms the dynamic-access port VLAN membership assignments that the switch has received from
the VMPS.
SUMMARY STEPS
1. vmps reconfirm
2. show vmps
OL-29065
Purpose
Configures the port as eligible for dynamic VLAN
membership.
The dynamic-access port must be connected to an end
station.
Returns to privileged EXEC mode.
Verifies your entries in the Operational Mode field of
the display.
(Optional) Saves your entries in the configuration file.
Catalyst 2960-X Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX
Reconfirming VLAN Memberships
87