Configuring Load Sharing Using Stp Path Cost - Cisco Catalyst 2960 series Configuration Manual

Configuring VLAN Trunks
Command or Action
Step 21
end
Example:
Switch(config-if)# end
Step 22
show running-config
Example:
Switch# show running-config
Step 23
copy running-config startup-config
Example:
Switch# copy running-config startup-config
Related Topics
Network Load Sharing Using STP Priorities, on page 62

Configuring Load Sharing Using STP Path Cost

These steps describe how to configure a network with load sharing using STP path costs.
OL-29065
Purpose
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Catalyst 2960-X Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX
Configuring Trunk Ports for Load Sharing
75