Introduction; System Requirements; Installing; Updates - NewTek TriCaster LC-11 Installation And Instructions Manual

2

INTRODUCTION

TriCaster LC-11™ adds to the growing line of high-quality control surfaces available for NewTek's
TriCaster™ live production systems. It provides agile and convenient control for your productions
in a durable and reliable form. This chapter reviews system requirements, and explains how to
connect your TriCaster LC-11 to your live producton suite.
2.1

SYSTEM REQUIREMENTS

©
Your NewTek LC-11 requires (as a minimum):
1. A NewTek TriCaster system running TriCaster 2.0 or higher software, or
2. A NewTek TriCaster TCXD300 or TCXD850 system, or
3. A NewTek VT[5] system (version 5.2 or higher).
2.2

INSTALLING

You're going to love this – all set? Connect the supplied cable between your LC-11 and a free
USB port on your TriCaster or VT system. That's it, you're completely done! There's no need to
install drivers or slog through a long complex set of steps.

2.2.1 UPDATES

As time goes along, software updates may be issued for your NewTek live production system to
provide various enhancements and improvements. To get the most out of your system, make it a
practice to periodically check for updates.
TRICASTER
Those running Standard Definition TriCasters can check for updates by clicking
the Close [x] button in the upper-right corner of the TriCaster desktop and
4