NewTek TriCaster LC-11 Installation And Instructions Manual page 19

SELCT (SELECT)
Press and hold the Selct button as described next to assign sources for Overlay channels.
PICK OVERLAY CHANNEL SOURCE
1. Press and hold the button labelled Selct.
2. Twirl the Overlay 1 or Overlay 2 knob above to click one by one through the list of
available overlay sources.
TOGGLE OVERLAY CHANNEL LOCK
1. Press and hold the button labelled Selct.
2. Press (click once) the Stills knob to toggle the Overlay channel Lock.
POS
Press and hold this button as described next to adjust the positioning for overlay channels.
ADJUST OVERLAY POSITION
1. Press and hold the button labelled Pos.
2. Adjust the (X/Y) position of Overlay 1 or Overlay 2 using the respective joystick.
RESET OVERLAY POSITION
1. Press (click once) the Overlay 1 or Overlay 2 knob to reset the Position settings for the
corresponding overlay channel.
SCALE
ADJUST SCALE (ASPECT LOCKED)
1. Press and hold the button labelled Scale.