Yamaha SCORPIO 54D Owner's Manual page 70

PERIODIC MAINTENANCE AND MINOR REPAIR
Replacing the tail/brake light
bulb
1. Tail/brake light bulb socket
6
6
1. Remove the seat. (See page 3-7)
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
EAU24082
1
1
1. Tail/brake light bulb
3. Remove the burnt out bulb by pu-
shing it in and turning it counter-
clockwise.
4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
5. Install the socket (together with
the bulb) by turning it clockwise.
_
6. Install the seat.
6-34
Replacing a turn signal light
bulb
1. Screw
2. Bulb
3. Lens
1. Remove the turn signal light lens
by removing the screw.
2. Remove the defective bulb by
pulling it out
3. Insert a new bulb into the socket
push it in
4. Place the lens in the original
position by installing the screw.
NOTICE: Do not overtighten the
screw, otherwise the lens may
break.
[ECA11191]
EAU24204
6