Lenovo TAB3 7 Plus Hardware Maintenance Manual
1050 USB Board and Speaker Box
For access, remove these FRUs in order:
• "1010 Back Cover" on page 27
• "1020 Battery" on page 29
Figure 5. Removal steps of USB board and speaker box
Use tweezers to gently pry off the speaker bracket components and set to one
side.
Note: be careful not to disconnect the soldered wire to the right of the speaker bracket
component.
Tear off the silver adhesive tape and use tweezers to pry off the ZIP connector
cover in order to disconnect the FPC and mini board connector.
34